Super Lube 70120 Multi-Purpose High Temperature Grease 120 lb Keg
$4,324.85
- Model:
-
70120
-
Minimum combined Super Lube orders must be $5000 excluding shipping. Please email us your RFQ to provide the shipping cost.
Item is normally in stock and ships out within 2-3 Business days (excluding transit time).
If out of stock it can take up to 2-4 weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Super Lube 70120 Multi-Purpose High Temperature Grease 120 lb Keg
Super Lube® Multi-Purpose Synthetic Grease is Super Lube's flagship grease. A highly versatile compound, its formula combines synthetic base fluids with PTFE micro powders to provide premium protection against friction, wear, rust, and corrosion at temperatures ranging from -45° to +450° Fahrenheit. Super Lube® grease is compatible with most other lubricants, and is a USDA/NSF listed Food Grade NLGI-2 lubricant, rated H-1 for incidental food contact.
Super Lube® Synthetic Grease will not run, drip, evaporate, form deposits, melt, or separate. This grease can be used in a wide variety of applications, on everything from fitness equipment, lawn mowers, and sewing machines to ball bearings, chains, wheels, winches, pulleys, and food processors. For a complete list of applications, or if you have a question, CONTACT US.
| Material Safety Data Sheets (MSDS) | Super-Lube Certifications | Super-Lube Technical Bulletins | Super-Lube Applications |
| TEST | TEST METHOD | SUPER LUBE® MULTI PURPOSE GREASE |
| NLGI GRADE | ASTM D217 | 2 |
| NLGI CLASSIFICATION* | ASTM D4950 | GC-LB* |
| COLOR | Translucent White | |
|
TEMPERATURE RANGE |
-45°F to 450°F (-43°C to 232°C) continuous -50°F to +500°F (-45°C to 260°C) intermittent |
|
| VISCOSITY (BASE OIL)
cSt @ 100°C SUS @ 40°C |
ASTM D445 |
8 350 |
| SPECIFIC GRAVITY | ASTM D1298 | .89 @ 60°F |
| WATER, PPM | ASTM D1744 | 35 ppm |
| TAN | ASTM D974 | 0.04 maximum |
| DROPPING POINT | ASTM D2265 | >500°F (260°C) |
| PENETRATION, worked (60 Strokes) | ASTM D217 | 265-295 mm/10 |
| FOUR BALL TEST | ASTM D2596 | |
| LOAD WEAR INDEX | 81.73 kg | |
| WELD POINT | 400 kg | |
| FOUR BALL EP TEST Scar diameter | ASTM D 2266 | <.5 |
| LOW TEMPERATURE TORQUE @ -54°C | ASTM D1478 | |
| Starting | 0.27 N-m (0.37 in-lbs) | |
| 10 Min Running | 0.08 N-m (0.11 in-lbs) | |
| 1 Hr Running | 0.006 N-m (0.09 in-lbs) | |
| SALT SPRAY TEST (100 hrs) | ASTM B117 | pass |
| DIELECTRIC LOSS | ASTM D924 | 1.2 X 1012 |
| DIELECTRIC RESISTIVITY | ASTM D1169 | 1.7 X 1014 |
| DIELECTRIC CONSTANT | ASTM D924 | 2.5 |
| OIL SEPARATION | ASTM D6184 | <2% |
| EVAPORATION LOSS 22 hours @ 212°F (100°C) | ASTM D972 | <1% |
| OXIDATION STABILITY, 100 hrs | ASTM D942 | 6.9 kPa |
| TIMKEN OK LOAD | ASTM 2509 | 40 lbs |
| FLASH POINT | ASTM D92 | >428°F (220°C) |
| FIRE POINT | ASTM D92 | >572°F (300°C) |
| WHEEL BEARING LEAKAGE | ASTM D1263 | 0.2 g |
| WATER WASHOUT | ASTM 1264 | 3.0% |
| COPPER CORROSION 24 hrs @ 100°C | ASTM D4048 and D130 | 1B, shiny |
| ACID NUMBER | ASTM D664 | .5 mg KOH/g |
| WARRANTY | 24 MONTHS |