Best 45HM IDH MAX Mortise Lock
$2,507.38
As low as:
- Model:
-
45HM
-
"Cylinder Not Included"
Cylinder Not Included
Item normally ships out within 2-4 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Best 45HM IDH MAX Mortise Lock
The IDH MAx offers convenience and efficiency for your electrified lock applications. Instead of separately installing reader devices, electrified strikes, door contacts and request-to-exit devices, you can now install just the IDH MAx in cylindrical or mortise lock applications. With IDH MAx, all of the formerly separate equipment needed to control access are self-contained in a single installation, drastically reducing the complexity of multiple wire runs.
Specifications
- Case
- Heavy wrought steel, 5-7/8" H x 4-1/4" D x 1" W steel parts are zinc dichromate plated for corrosion protection
- Faceplate
- Brass or bronze, 8" H x 1-1/4" W x 1/16" T . Lock face automatically adjusts to proper bevel during installation
- Strike
- Brass, bronze or stainless steel base material, 4-7/8" H x 1-1/4" W x 3/32" T. Fits standard door frame cut out as specified in ANSI A115.1. Universal (non-handed) strike supplied standard with lock
- Backset
- 2 3/4"
- Door thickness
- For doors 1 3/4" - 3" thick. (specify thickness when ordering)
- Installation
- Lock requires modified door prep to mount the trim. Faceplate dimensions fit standard door preparation as specified in ANSI A115.1,. Lockset is easily reversible to match door handing without opening the mortise case
- Latchbolt
- Solid stainless steel, 3/4" throw. Latch is oil-impregnated for anti-friction operation. Reversible without opening case
- Deadbolt
- Solid stainless steel, 1" throw
- Auxiliary boltStainless steel, non-handed
- Escutcheons
- 10 1/2" H x 3 5/16" W x 1" D (1" at the top, sloping down to 3/4" at the bottom)
- Knobs
- Diameter
- Lever handle
- Brass, bronze or stainless steel. (Lever
- Mounting
- Knob and lever attached with hardened set screw on inside knob or inside lever
- Maximum current draw
- 1.1 Amp for 50 milliseconds
- Typical current draw (hold condition)
- 650 milliAmps Voltage
- Magnetic Stripe Card Reader
- Read Rate - 5 inches per second to 50 inches per second
- Card Thickness
- ISO standard .030" +/- .003 thick. Compliance to FCC, Canadian, and European EMC requirements; for interference FCC Class A digital apparatus
- Proximity Reader
- ANSI/BHMA A156.25 compliant. Compatible with Motorola / Indala and HID proximity cards. ABA and Wiegand output. Weatherproof bezel and gasket provide protection for outdoor use. (Usable in most environmental/exterior applications)
- Card Read Range
- 0 - 3 inches. Compliance to US FCC, Canadian FCC, and European EMC requirements
- ESD Protection
- 15 Kilo Volt
Applications
- Healthcare
- Government