INOX DC61 Series Standard Duty Door Closer with Standard Arm
$190.40
- Model:
-
DC61
Item normally ships out within 4-6 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: INOX DC61 Series Standard Duty Door Closer with Standard Arm
Features
- Rack & Pinion operation provides smooth, constant control of door through full opening and closing cycle
- Closer body cast of special aluminum alloy machined to accommodate interactive steel components under operation conditions
- 180° door swing when door, frame, and arm do not interfere
- DC6126/DC6114 door closer is non-handed; can be installed on either right or left hand swing doors
- Sweep speed control valve allows adjustment of door speed from open door's 90° position to approximately 10° from closed position
- Tri-Packed DC61 Series includes self-tapping (SRT), sex nuts & bolts (SNB) and parallel arm (PA) bracket to allow for regular, top jamb, and parallel arm installation
- Latch control valve allows adjustment of door latch speed from approximately 10° down to door’s fully closed position
- Adjustable back check valve provides control of door in opening cycle from approximately 75° of door opening. Valve cushions door opening when door is forcibly opened beyond its preadjusted setting
- Multi-Sized Door Closer Adjustable through the power range of 1 through 4
- DC6114 door closer confirms to the opening force requirements of ADA and ANSI/BHMA standard A117.1 for interior doors
Specifications
| DC6114 Power Size | 1 through 4 |
| DC6126 Power Size | 2 through 6 |
| Body | One-piece aluminum alloy body with rack & pinion design |
| Pressure Valves | Separate and independent latch, sweep, and back-check pressure valves |
| Handing | Non-handed; can be installed on either left- or right-handed swing doors |
| Cover | Standard Closer comes Less Cover |
| Piston | 34mm (1-11/32") diameter |
| Pinion Shaft | 16mm (5/8") diameter |
| Projection | 66.7mmm (2-5/8") without cover |
| Door Swing | Standard arm applications with covers allow doors up to 180° swing |
Compliances
- ANSI/BHMA A156.4 Grade 1 Closers
- ANSI A117.1 ADA Accessibility (DC6114 Only)
- UL Listed for ANSI/UL10B and UL10C
- CAN/ULC S104 up to 3 Hours UL 228 UBC Standard 7-2 (1997)
- NFPA 252 NFPA 80 National Fire Protection - Fire Door Assembly
- NFPA101 National Fire Protection - Life Safety
- ANSI/BHMA A156.18 Finishes
Downloads