INOX DC85 Series Door Closer Grade 1, ADA Plastic Full Cover
$228.00
As low as:
- Model:
-
DC8516
Item normally ships out within 4-6 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: INOX DC85 Series Door Closer Grade 1, ADA Plastic Full Cover
Heavy Duty Door Closer
ANSI/BHMA A156.4 Grade 1
Features
- Rack & Pinion operation provides smooth, constant control of door through full opening and closing cycle
- Closer body cast of special aluminum alloy machined to accommodate interactive steel components under operation conditions
- 180° door swing when door, frame, and arm do not interfere
- Sweep speed control valve allows adjustment of door speed from open door's 90° position to approximately 10° from closed position
- Latch speed control valve allows adjustment of door latch speed from approximately 10° down to door’s fully closed position
- Includes self-tapping (SRT), sex nuts & bolts (SNB), and parallel arm (PA) bracket to allow for multiple ways to install
- Adjustable back check valve provides control of door in opening cycle from approximately 75° of door opening. Valve cushions door opening when door is forcibly opened beyond its preadjusted setting
- Standard cover molded from high impact materials
- Adjustable through power range of 1 through 6
- Confirms to opening force requirements of ADA and ANSI?BHMA standard A117.1 for interior doors
Specifications
| Power Size | 1 through 6 (adjustable; ships at 3); meets ADA barrier-free requirement |
| Body | One piece aluminum alloy body with rack & pinion design |
| Pressure Valves | Separate and independent latch, sweep, and back-check pressure valves |
| Handing | Non-handed; can be installed on either left- or right-handed swing doors |
| Cover | Plastic full cover standard |
| Fasteners | SRT fasteners shipped standard |
| Piston | 32mm (1-17/64") diameter |
| Pinion Shaft | 16mm (3/8") diameter |
| Projection | 53mm (2-3/32") without cover |
| Door Swing | Standard arm applications with covers allow doors up to 180° swing |
Compliance
- ANSI/BHMA A156.4 Grade 1 Closers
- ANSI A117.1 ADA Accessibility
- UL Listed for ANSI/UL10B and UL10C
- CAN/ULC S104 up to 3 Hours
- UL228 UBC Standard 7-2 (1997) NFPA 252
- NFPA 80 National Fire Protection - Fire Door Assembly
- NFPA101 National Fire Protection - Life Safety
- ANSI/BHMA A156.18 Finishes
Downloads