Marks USA BE101/LA118 Maxium Security Mortise Lockset
$167.00
As low as:
- Model:
-
BE101/LA118
Item normally ships out within 2-4 Weeks (excluding transit time).
Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.
Request for Quote
Details: Marks USA BE101/LA118 Maxium Security Mortise Lockset
Marks USA's Custom Lockset division is about problem solving. If you have a unique situation, high abuse area or need a specialized high security application, then Marks USA might have the answer you're looking for.
Performance Specifications
- Life Test
- 1,500,000 cycles minimum
- ANSI Test
- Meets or exceeds all operational and security tests of ANSI specifications A156 .13-2005 for series 1000, Grade 1
- Fire Test
- UL Listed, 3 hour fire rated . Meets ADA requirements
Trim Specifications
"Barrier" Thru-bolted steel lever/plate assemblies with brass machined lever bearings . Screwless forged American levers, 4-1/2" long to meet ADA requirements, fastened to plates with hardened snap rings . Spring loaded 5/16" spindles (no set screws) . Dark bronze powder coated finish .
- Exterior
- Wrought steel lever/plate assembly . 10-1/8" × 4" × 5/64" with 3 concealed welded thru-posts .Center post braces lock body for proper alignment in 1-3/4" thick door . Plate covers cylinder with only the keyway exposed
- Optional Exterior
- Plate prepared for IC core cylinder
- Interior
- Flat steel lever/plate assembly . 10-3/4" × 3-1/8" × 3/32" thick with 3 each 1/4"-20 mounting bolts . Center bolt passes through lock body to integrate trim with lock
- Cylinder
- 1-1/8" long, 6 pin, solid brass with spacing collar concealed under exterior "Barrier" plate; 2 keys
- Strike
- 4-7/8" × 1-1/4" × 3/32" thick, 5/8" curved lip . Conforms to ANSI spec ., A115 .1
- Door Thickness
- 1-3/4" standard
Lock Specifications: 5 Series (2-3/4" Backset)
- Lock Front: Adjustable bevel steel backplate 1-1/4" × 8" × 7/64" thick . Cover plate 1/16" thick .
- Deadbolt: Stainless steel w/hardened roll pins, 1" throw .
- Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible) .
- Auxiliary deadlatch: 1/2" throw (reversible) - (not shown) .
- Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator .
- Independent exterior and interior lever support springs .
- Hub Follower: (to lock hub) steel 1/8" thick .
- Hub Stop: (to limit lever travel) steel 1/8" thick .
- Case: Stamped steel 3/32" thick, zinc dichromate finish .
- Spindles: Independent spring-loaded spindles, 5/16" square .
Applications
- Public Buildings & Facilities
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Multifamily & Mixed-Use